Decorative Lighting — the collection Blog
Projects Clients Contact Get a Quote →

Bespoke Decorative Lighting  ·  Greater Noida

A light should fit the room.
Not the other way round.

We do not sell lights off a shelf. You tell us the room; our design team draws a piece for it; our own Greater Noida workshop builds it. Fifteen working days later we hang it for you.

15working days
0pieces in stock
2019making since
Crystal cluster chandelier made and installed by SARA Enterprises in a double-height lobby

Why bespoke

Anyone can sell you
a light. Almost no one
will make you one.

A decorative light is the one object in a room that everybody looks up at. Buy it off a website and you get a fitting designed for somebody else's ceiling — the wrong drop, the wrong diameter, the wrong warmth.

We come at it from the other side. SARA has been fabricating architectural signage and facades since 2019 — metal, glass, light and installation, in our own unit at Kasna. A chandelier is those same four skills, pointed at the ceiling.

So there is no catalogue to choose from and nothing in a warehouse. There is a drawing made for your room, which you approve before a single piece is cut, and a workshop twenty minutes from your site that builds it.

Our own work

Pieces we have already
built and hung.

Every photograph below is a SARA commission, shot where it was installed. No renders, no supplier catalogue images.

Crystal cluster, double-height lobby — decorative lighting made by SARA Enterprises, Greater Noida
Crystal cluster, double-height lobbyTwelve textured glass shades hung at staggered drops from a single blackened ceiling plate.
Blackened steel drum, daylight — decorative lighting made by SARA Enterprises, Greater Noida
Blackened steel drum, daylightSeeded glass rods set into a spoked steel ring — photographed unlit, in a marble entrance.
The same drum, lit — decorative lighting made by SARA Enterprises, Greater Noida
The same drum, litThe fixture at night. The spokes read as the design; the glass carries the light.
Linear array, boardroom — decorative lighting made by SARA Enterprises, Greater Noida
Linear array, boardroomA drawn grid of cylinder pendants on exposed cable runs, set out to the table below.
Bubble-glass cascade, stairwell — decorative lighting made by SARA Enterprises, Greater Noida
Bubble-glass cascade, stairwellClear glass spheres on individual drops, falling through a full-height void beside a fluted column.
Pendant cluster, reception — decorative lighting made by SARA Enterprises, Greater Noida
Pendant cluster, receptionA scattered constellation of small glass fittings over a curved reception desk.
Green glass wall bracket — decorative lighting made by SARA Enterprises, Greater Noida
Green glass wall bracketFaceted green shade on a turned brass arm and spike, made as a pair for a corridor.
Cut amber wall bracket — decorative lighting made by SARA Enterprises, Greater Noida
Cut amber wall bracketDiamond-cut amber glass on the same brass bracket, from the same commission.
Feather chandelier, lounge — decorative lighting made by SARA Enterprises, Greater Noida
Feather chandelier, loungeA soft white centrepiece against a six-metre ceiling, balanced with floor and cove lighting.

Photographed on site as each job was handed over.

What we make

Six families.
One workshop.

Because every piece is cut and finished on the same floor, a chandelier, the wall brackets beneath it and the pendants down the corridor can share a metal and a finish — so a room reads as one commission, not four purchases.

Chandeliers

Centrepieces for lobbies, atriums, banquet halls and double-height homes — sized to your ceiling, not to a box.

Pendant Cascades

Multi-drop arrangements through stairwell voids and over reception desks, each drop set to its own height on site.

Wall Lights

Brass and glass brackets made in matched pairs and runs for corridors, headboards and feature walls.

Linear & Island

Drawn grids and runs of pendants over boardroom tables, counters and long dining spaces, set out to the furniture below.

Lobby & Atrium

Feature schemes for entrances and sales galleries, where the light has to carry the brand as well as the room.

One-off Commissions

Sculptural pieces, branded fittings, lights built around a structure — the jobs that have no category.

Made by SARA

What you get that a
lighting shop cannot give you.

Made in our own unit

Cut, finished and wired at A2/94 Kasna — the same floor and team as our signage and facade work since 2019.

A drawing first

You see the piece before it exists. Nothing is built, and no balance is due, until you have approved the drawing.

15 working days

From approved drawing to installed light. Fast enough for a fit-out programme — and we will tell you when it is not.

We hang it ourselves

Across Delhi NCR we deliver, fix and wire the piece with our own team. Other cities on enquiry.

How a commission runs

From your room
to your ceiling.

Stage 01

Consult

We look at the room — ceiling height, the light already in it, the materials around it. In NCR that is a site visit.

Stage 02

Drawing

Our design team draws the piece to your space. You approve it. 50% advance starts the build.

Stage 03

Make

Fabricated and finished in our own Greater Noida unit, to the same standard as our facade work.

Stage 04

Check

Assembled, wired and switched on in the workshop before it leaves — finish, fit and electricals.

Stage 05

Install

We bring it, fix it and wire it on site. Balance is due before delivery.

Terms  ·  50% advance on drawing approval  ·  balance before delivery  ·  15 working days  ·  delivered & installed across Delhi NCR


The same workshop builds for

SamsungHDFC BankIndiGoNetwork 18 ACE GroupSKA GroupSkymarkEldeco

Before you ask

The questions that
come up every time.

Do you sell ready-made lights?

No. We hold no stock and we are not a showroom. Every piece is drawn for your space and built after you approve the drawing.

How long does it take?

15 working days from drawing approval to installation — roughly 1–3 days for design and approval, 10 days to make, 2 days to deliver and hang.

What are the payment terms?

50% advance once you approve the drawing, balance before delivery and installation. The same terms as our signage work.

Do you install, or only supply?

Across Delhi NCR we deliver and install ourselves, including ceiling fixing and the electrical connection. For other cities, ask us — large pieces are fragile and we quote transport case by case.

Can you work to an architect's drawing?

Yes, regularly. We can also take a reference image and re-engineer it to your ceiling height, load and light level.

What sizes and finishes are possible?

Because we fabricate in-house there is no fixed size list. We work in brass, blackened and stainless steel, glass and acrylic, and we match the drop to the ceiling height measured on site.

Start here

Tell us about the room.
We will draw you a light.

Send a photo of the space, the ceiling height and roughly what you have in mind. We will come back with a concept and a price — no obligation, no showroom visit.

A2/94, UPSIDC Site-5, Kasna  ·  Greater Noida 201312  ·  Mon–Sat 9–6